Overview of of Rare Earth 99%-99.9% Ytterbium Metal Powder

of Rare Earth 99%-99.9% Ytterbium Metal Powder comprises a broad category of finely divided, solid particles derived from various metals or metal alloys. These powders exhibit unique characteristics that make them indispensable in modern manufacturing and advanced technologies.

Key Characteristics of of Rare Earth 99%-99.9% Ytterbium Metal Powder

1. Particle Size and Distribution: The size and uniformity of particles significantly influence flowability, packing density, and the final product’s mechanical and physical properties. Finer powders generally offer a larger surface area, which is beneficial for reactions and sintering but may also increase aggregation.

2. Composition: Metal powders can be elemental (pure metal) or alloyed, combining two or more metals to achieve desired properties such as enhanced strength, corrosion resistance, or electrical conductivity.

3. Shape: Particle shapes range from spherical to irregular or flake-like. Spherical powders provide better flowability and packing, while flake-shaped powders are suited for coatings and electronic applications due to their unique orientation and surface area.

4. Purity: Depending on the application, metal powders can be highly purified to remove impurities, critical for uses in electronics, aerospace, and medical devices where contamination could compromise performance.

( of Rare Earth 99%-99.9% Ytterbium Metal Powder)

Parameters of of Rare Earth 99%-99.9% Ytterbium Metal Powder

Ytterbium (Yb), a rare earth element, is often used in high-tech applications due to its unique properties. The purity level you mentioned, 99%-99.9%, indicates that the ytterbium metal powder is of exceptionally high quality. Here are some typical parameters for such a high-purity ytterbium metal powder:

1. **Purity**: As stated, the purity is between 99% and 99.9%. This means that the impurities present in the powder are very minimal, typically containing less than 0.1% other elements.

2. **Particle Size Distribution**: The powder will have a specific particle size distribution, usually measured in micrometers (μm) or nanometers (nm). For high-purity powders, it’s common to have a narrow distribution for better homogeneity and controlled reactivity in processes.

3. **Density**: The density of ytterbium metal can vary slightly depending on the specific grade, but it’s around 6.7 g/cm³.

4. **Melting Point**: Ytterbium has a melting point of approximately 727°C (1,341°F).

5. **Refractive Index**: It has a relatively low refractive index compared to other rare earth elements, which contributes to its optical properties.

6. **Crystal Structure**: Ytterbium typically exists in a hexagonal close-packed crystal structure.

7. **Surface Finish**: High-purity powders often have a smooth surface finish to minimize impurities and improve handling characteristics.

8. **Storage Requirements**: Since it’s a reactive metal, ytterbium metal powder may need to be stored in an inert atmosphere (e.g., argon or nitrogen) and in a dry environment to prevent oxidation.

9. **Application-specific Properties**: Depending on the intended use, other parameters like magnetic susceptibility, thermal conductivity, or electronic conductivity might also be relevant.

Please note that these values are general guidelines and actual specifications may vary depending on the supplier and the specific requirements of the end application. To get detailed information, you should consult the manufacturer or supplier directly.

( of Rare Earth 99%-99.9% Ytterbium Metal Powder)

Company Profile

Metal in China is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality copper and relatives products.

The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are looking for high-quality metal powder and relative products, please feel free to contact us or click on the needed products to send an inquiry.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.

FAQs of of Rare Earth 99%-99.9% Ytterbium Metal Powder

Q1. What exactly is of Rare Earth 99%-99.9% Ytterbium Metal Powder, and how is it different from solid metal?

of Rare Earth 99%-99.9% Ytterbium Metal Powder consists of tiny particles of pure metals or metal alloys. Unlike solid metal, which exists as a continuous mass, metal powder offers increased surface area, making it more reactive and easier to form into complex shapes through processes like sintering or 3D printing.

Q2. How is of Rare Earth 99%-99.9% Ytterbium Metal Powder produced, and what are the common production methods?

of Rare Earth 99%-99.9% Ytterbium Metal Powder is typically produced through several methods, including:

– Atomization: Molten metal is sprayed into fine droplets that cool and solidify into powder.

– Chemical reduction: Metal oxides are reduced to their elemental state to form powder.

– Electrolysis: Electrical current is used to deposit metal onto a cathode, later harvested as powder.

– Mechanical processes: Large metal pieces are milled or ground down into powder.

Q3. What factors determine the quality and suitability of metal powders for different applications?

Quality and suitability depend on factors like:

– Particle size and distribution: Affects flowability, packing density, and final product properties.

– Composition and purity: Determines the material’s properties and its appropriateness for specific uses.

– Shape: Spherical powders for better flow, flake shapes for coatings.

– Density and porosity: Influences strength and other mechanical properties.

Q4. What safety precautions should be taken when handling metal powders?

Safety measures include:

– Wearing personal protective equipment (PPE) like gloves, goggles, and respirators.

– Storing powders in airtight containers away from moisture, heat, and ignition sources.

– Using explosion-proof equipment in processing areas.

– Ensuring proper ventilation to avoid dust accumulation and inhalation risks.

– Following strict handling procedures to prevent spills and cross-contamination.

Q5. How are of Rare Earth 99%-99.9% Ytterbium Metal Powder used in the manufacturing industry?

of Rare Earth 99%-99.9% Ytterbium Metal Powder find applications in:

– Powder Metallurgy: To create parts by compacting and sintering, ideal for mass production of complex components.

– Additive Manufacturing (3D Printing): Layer-by-layer construction of parts for customized and intricate designs.

– Thermal Spray Coatings: Applying protective or functional coatings to surfaces for corrosion resistance, etc.

– Electronics: Precious metal powders in conductive pastes, connectors, and other components.

– Chemical and Catalyst Industries: As catalysts due to their high surface area, promoting chemical reactions.

Q6. Are of Rare Earth 99%-99.9% Ytterbium Metal Powder recyclable or reusable?

Yes, of Rare Earth 99%-99.9% Ytterbium Metal Powder can often be recycled or reused. Unused powder or scrap from manufacturing processes can frequently be collected, reprocessed, and reintroduced into production cycles, contributing to sustainable manufacturing practices.

Q7. How does the cost of of Rare Earth 99%-99.9% Ytterbium Metal Powder compare to traditional metal forms?

The cost depends on factors like the metal type, production method, and purity. While of Rare Earth 99%-99.9% Ytterbium Metal Powder may initially seem more expensive due to additional processing, their efficiency in certain manufacturing processes (like producing complex shapes with minimal waste) can lead to overall cost savings.

( of Rare Earth 99%-99.9% Ytterbium Metal Powder)