Overview of Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity
Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity comprises a broad category of finely divided, solid particles derived from various metals or metal alloys. These powders exhibit unique characteristics that make them indispensable in modern manufacturing and advanced technologies.
Key Characteristics of Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity
-
Particle Size and Distribution: The size and uniformity of particles significantly influence flowability, packing density, and the final product’s mechanical and physical properties. Finer powders generally offer a larger surface area, which is beneficial for reactions and sintering but may also increase aggregation.
-
Composition: Metal powders can be elemental (pure metal) or alloyed, combining two or more metals to achieve desired properties such as enhanced strength, corrosion resistance, or electrical conductivity.
-
Shape: Particle shapes range from spherical to irregular or flake-like. Spherical powders provide better flowability and packing, while flake-shaped powders are suited for coatings and electronic applications due to their unique orientation and surface area.
-
Purity: Depending on the application, metal powders can be highly purified to remove impurities, critical for uses in electronics, aerospace, and medical devices where contamination could compromise performance.
(Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity)
Parameters of Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity
Titanium foam anodes, also known as nickel foam-supported titanium or hydrolyzed porous titanium, are commonly used in electrochemical processes due to their high surface area and excellent corrosion resistance. The porosity of these materials can vary depending on the manufacturing process and intended application. Here are some common porosity parameters for different grades:
1. 80% Porosity: This is considered a relatively low porosity level, providing good mechanical strength but with less exposed surface area for electrochemical reactions.
2. 85% Porosity: A moderate porosity that offers a balance between mechanical stability and increased surface area for better ion diffusion and improved efficiency in applications like batteries or electrolysis.
3. 90% Porosity: This is a more open structure, allowing for extensive contact between the electrolyte and the titanium surface. It’s suitable for processes where high current density is required or when maximizing mass transfer is important.
4. 95% Porosity: A highly porous material, with most of the volume being void space. This provides exceptional surface area but may have lower mechanical integrity and may be more prone to deformation under stress.
5. 98% Porosity:,，，。
When specifying a titanium foam anode, it’s essential to consider factors like porosity, thickness, mechanical properties, and the specific requirements of your application. It’s also crucial to consult with the manufacturer or supplier to ensure you get the appropriate grade for your needs.
(Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity)
Company Profile
Metal in China is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality copper and relatives products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality metal powder and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity
Q1. What exactly is Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity, and how is it different from solid metal?
Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity consists of tiny particles of pure metals or metal alloys. Unlike solid metal, which exists as a continuous mass, metal powder offers increased surface area, making it more reactive and easier to form into complex shapes through processes like sintering or 3D printing.
Q2. How is Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity produced, and what are the common production methods?
Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity is typically produced through several methods, including:
– Atomization: Molten metal is sprayed into fine droplets that cool and solidify into powder.
– Chemical reduction: Metal oxides are reduced to their elemental state to form powder.
– Electrolysis: Electrical current is used to deposit metal onto a cathode, later harvested as powder.
– Mechanical processes: Large metal pieces are milled or ground down into powder.
Q3. What factors determine the quality and suitability of metal powders for different applications?
Quality and suitability depend on factors like:
– Particle size and distribution: Affects flowability, packing density, and final product properties.
– Composition and purity: Determines the material’s properties and its appropriateness for specific uses.
– Shape: Spherical powders for better flow, flake shapes for coatings.
– Density and porosity: Influences strength and other mechanical properties.
Q4. What safety precautions should be taken when handling metal powders?
Safety measures include:
– Wearing personal protective equipment (PPE) like gloves, goggles, and respirators.
– Storing powders in airtight containers away from moisture, heat, and ignition sources.
– Using explosion-proof equipment in processing areas.
– Ensuring proper ventilation to avoid dust accumulation and inhalation risks.
– Following strict handling procedures to prevent spills and cross-contamination.
Q5. How are Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity used in the manufacturing industry?
Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity find applications in:
– Powder Metallurgy: To create parts by compacting and sintering, ideal for mass production of complex components.
– Additive Manufacturing (3D Printing): Layer-by-layer construction of parts for customized and intricate designs.
– Thermal Spray Coatings: Applying protective or functional coatings to surfaces for corrosion resistance, etc.
– Electronics: Precious metal powders in conductive pastes, connectors, and other components.
– Chemical and Catalyst Industries: As catalysts due to their high surface area, promoting chemical reactions.
Q6. Are Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity recyclable or reusable?
Yes, Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity can often be recycled or reused. Unused powder or scrap from manufacturing processes can frequently be collected, reprocessed, and reintroduced into production cycles, contributing to sustainable manufacturing practices.
Q7. How does the cost of Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity compare to traditional metal forms?
The cost depends on factors like the metal type, production method, and purity. While Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity may initially seem more expensive due to additional processing, their efficiency in certain manufacturing processes (like producing complex shapes with minimal waste) can lead to overall cost savings.
(Titanium foam anode plate nickel foam hydrolyzed porous titanium 80% 85% 90% 95% 98% porosity)
