Overview of Hot China Original Silicon Metal Lump Powder Granule for Industry

Hot China Original Silicon Metal Lump Powder Granule for Industry comprises a broad category of finely divided, solid particles derived from various metals or metal alloys. These powders exhibit unique characteristics that make them indispensable in modern manufacturing and advanced technologies.

Key Characteristics of Hot China Original Silicon Metal Lump Powder Granule for Industry

1. Particle Size and Distribution: The size and uniformity of particles significantly influence flowability, packing density, and the final product’s mechanical and physical properties. Finer powders generally offer a larger surface area, which is beneficial for reactions and sintering but may also increase aggregation.

2. Composition: Metal powders can be elemental (pure metal) or alloyed, combining two or more metals to achieve desired properties such as enhanced strength, corrosion resistance, or electrical conductivity.

3. Shape: Particle shapes range from spherical to irregular or flake-like. Spherical powders provide better flowability and packing, while flake-shaped powders are suited for coatings and electronic applications due to their unique orientation and surface area.

4. Purity: Depending on the application, metal powders can be highly purified to remove impurities, critical for uses in electronics, aerospace, and medical devices where contamination could compromise performance.

(Hot China Original Silicon Metal Lump Powder Granule for Industry)

Parameters of Hot China Original Silicon Metal Lump Powder Granule for Industry

The parameters for hot-pressed China original silicon metal lump powder or granules for industry typically include:

1. **Grade**: Silicon metal is available in different grades, such as 99.7%, 99.8%, 99.9% (FeSi), and others, based on purity. Higher grades indicate better quality and higher silicon content.

2. **Chemical Composition**: Key elements include silicon (Si) and iron (Fe) with trace amounts of other elements like aluminum (Al), carbon (C), boron (B), phosphorus (P), and sulfur (S). The exact composition may vary slightly between batches.

3. **Density**: Generally, the density of silicon metal lumps or granules ranges from 2.3 to 2.4 g/cm³.

4. **Particle Size Distribution**: This refers to the range of particle sizes in the product. It’s usually specified as a percentage distribution in various size fractions (e.g., 40-60 mesh, 60-80 mesh, etc.).

5. **Melting Point**: Silicon metal has a melting point around 1,414°C (2,577°F).

6. **Residual Purity**: The level of impurities left after refining, which affects its electrical conductivity and performance in specific industrial applications.

7. **Hardness**: Silicon metal is relatively soft and malleable, making it easy to shape.

8. **Heat Capacity**: The amount of heat energy required to raise the temperature of one unit mass of the material.

9. **Specific Gravity**: The ratio of the material’s density to that of water.

10. **Thermal Conductivity**: How well the material conducts heat.

Please note that these values can vary depending on the manufacturer, production process, and intended application. To get specific details, you should consult the technical data sheet provided by the supplier or manufacturer.

(Hot China Original Silicon Metal Lump Powder Granule for Industry)

Company Profile

Metal in China is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality copper and relatives products.

The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are looking for high-quality metal powder and relative products, please feel free to contact us or click on the needed products to send an inquiry.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.

FAQs of Hot China Original Silicon Metal Lump Powder Granule for Industry

Q1. What exactly is Hot China Original Silicon Metal Lump Powder Granule for Industry, and how is it different from solid metal?

Hot China Original Silicon Metal Lump Powder Granule for Industry consists of tiny particles of pure metals or metal alloys. Unlike solid metal, which exists as a continuous mass, metal powder offers increased surface area, making it more reactive and easier to form into complex shapes through processes like sintering or 3D printing.

Q2. How is Hot China Original Silicon Metal Lump Powder Granule for Industry produced, and what are the common production methods?

Hot China Original Silicon Metal Lump Powder Granule for Industry is typically produced through several methods, including:

– Atomization: Molten metal is sprayed into fine droplets that cool and solidify into powder.

– Chemical reduction: Metal oxides are reduced to their elemental state to form powder.

– Electrolysis: Electrical current is used to deposit metal onto a cathode, later harvested as powder.

– Mechanical processes: Large metal pieces are milled or ground down into powder.

Q3. What factors determine the quality and suitability of metal powders for different applications?

Quality and suitability depend on factors like:

– Particle size and distribution: Affects flowability, packing density, and final product properties.

– Composition and purity: Determines the material’s properties and its appropriateness for specific uses.

– Shape: Spherical powders for better flow, flake shapes for coatings.

– Density and porosity: Influences strength and other mechanical properties.

Q4. What safety precautions should be taken when handling metal powders?

Safety measures include:

– Wearing personal protective equipment (PPE) like gloves, goggles, and respirators.

– Storing powders in airtight containers away from moisture, heat, and ignition sources.

– Using explosion-proof equipment in processing areas.

– Ensuring proper ventilation to avoid dust accumulation and inhalation risks.

– Following strict handling procedures to prevent spills and cross-contamination.

Q5. How are Hot China Original Silicon Metal Lump Powder Granule for Industry used in the manufacturing industry?

Hot China Original Silicon Metal Lump Powder Granule for Industry find applications in:

– Powder Metallurgy: To create parts by compacting and sintering, ideal for mass production of complex components.

– Additive Manufacturing (3D Printing): Layer-by-layer construction of parts for customized and intricate designs.

– Thermal Spray Coatings: Applying protective or functional coatings to surfaces for corrosion resistance, etc.

– Electronics: Precious metal powders in conductive pastes, connectors, and other components.

– Chemical and Catalyst Industries: As catalysts due to their high surface area, promoting chemical reactions.

Q6. Are Hot China Original Silicon Metal Lump Powder Granule for Industry recyclable or reusable?

Yes, Hot China Original Silicon Metal Lump Powder Granule for Industry can often be recycled or reused. Unused powder or scrap from manufacturing processes can frequently be collected, reprocessed, and reintroduced into production cycles, contributing to sustainable manufacturing practices.

Q7. How does the cost of Hot China Original Silicon Metal Lump Powder Granule for Industry compare to traditional metal forms?

The cost depends on factors like the metal type, production method, and purity. While Hot China Original Silicon Metal Lump Powder Granule for Industry may initially seem more expensive due to additional processing, their efficiency in certain manufacturing processes (like producing complex shapes with minimal waste) can lead to overall cost savings.

(Hot China Original Silicon Metal Lump Powder Granule for Industry)