Overview of Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making
Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making comprises a broad category of finely divided, solid particles derived from various metals or metal alloys. These powders exhibit unique characteristics that make them indispensable in modern manufacturing and advanced technologies.
Key Characteristics of Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making
-
Particle Size and Distribution: The size and uniformity of particles significantly influence flowability, packing density, and the final product’s mechanical and physical properties. Finer powders generally offer a larger surface area, which is beneficial for reactions and sintering but may also increase aggregation.
-
Composition: Metal powders can be elemental (pure metal) or alloyed, combining two or more metals to achieve desired properties such as enhanced strength, corrosion resistance, or electrical conductivity.
-
Shape: Particle shapes range from spherical to irregular or flake-like. Spherical powders provide better flowability and packing, while flake-shaped powders are suited for coatings and electronic applications due to their unique orientation and surface area.
-
Purity: Depending on the application, metal powders can be highly purified to remove impurities, critical for uses in electronics, aerospace, and medical devices where contamination could compromise performance.
(Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making)
Parameters of Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making
The Factory Supply Silicon Metal (553) as a metallurgical powder, specifically used as a high-purity deoxidizer agent in steel making, typically has the following parameters:
1. Chemical Composition: Silicon metal (Si) content is usually around 98% or higher, with a purity level of 99.99% for high-grade products. It may also contain trace elements such as aluminum, boron, and phosphorus, but these are kept to minimal levels to maintain its deoxidizing efficiency.
2. Particle Size Distribution: The powder size can vary depending on the specific application, but generally ranges from 40 mesh (350-630 microns) to 200 mesh (74-440 microns) for better flowability and homogeneity in the steelmaking process.
3. Melting Point: Silicon metal has a melting point of approximately 1,414°C (2,587°F), which is crucial for efficient deoxidation during steelmaking, where it reacts with oxygen at high temperatures.
4. Reactivity: Silicon reacts with oxygen to form SiO2 (silica), which is a non-reactive slag that can be easily separated from the molten steel. This property makes it an effective deoxidizer.
5. Heat Absorption: Silicon metal has a low heat of fusion, meaning it absorbs less heat during the addition, helping to maintain the temperature of the steel bath.
6. Pourability: The powder form ensures easy mixing and pouring into the furnace without causing segregation or clumping.
7. Safety & Environmental Considerations: Silicon metal is generally safe to handle, but proper safety measures should be followed during storage and handling due to its flammability when exposed to air.
8. Storage: It is stored in a dry, cool, and well-ventilated area to prevent oxidation.
Please note that specific parameters may vary depending on the supplier and the exact grade of silicon metal being used. It’s essential to consult the manufacturer’s specifications for the most accurate information.
(Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making)
Company Profile
Metal in China is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality copper and relatives products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality metal powder and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making
Q1. What exactly is Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making, and how is it different from solid metal?
Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making consists of tiny particles of pure metals or metal alloys. Unlike solid metal, which exists as a continuous mass, metal powder offers increased surface area, making it more reactive and easier to form into complex shapes through processes like sintering or 3D printing.
Q2. How is Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making produced, and what are the common production methods?
Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making is typically produced through several methods, including:
– Atomization: Molten metal is sprayed into fine droplets that cool and solidify into powder.
– Chemical reduction: Metal oxides are reduced to their elemental state to form powder.
– Electrolysis: Electrical current is used to deposit metal onto a cathode, later harvested as powder.
– Mechanical processes: Large metal pieces are milled or ground down into powder.
Q3. What factors determine the quality and suitability of metal powders for different applications?
Quality and suitability depend on factors like:
– Particle size and distribution: Affects flowability, packing density, and final product properties.
– Composition and purity: Determines the material’s properties and its appropriateness for specific uses.
– Shape: Spherical powders for better flow, flake shapes for coatings.
– Density and porosity: Influences strength and other mechanical properties.
Q4. What safety precautions should be taken when handling metal powders?
Safety measures include:
– Wearing personal protective equipment (PPE) like gloves, goggles, and respirators.
– Storing powders in airtight containers away from moisture, heat, and ignition sources.
– Using explosion-proof equipment in processing areas.
– Ensuring proper ventilation to avoid dust accumulation and inhalation risks.
– Following strict handling procedures to prevent spills and cross-contamination.
Q5. How are Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making used in the manufacturing industry?
Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making find applications in:
– Powder Metallurgy: To create parts by compacting and sintering, ideal for mass production of complex components.
– Additive Manufacturing (3D Printing): Layer-by-layer construction of parts for customized and intricate designs.
– Thermal Spray Coatings: Applying protective or functional coatings to surfaces for corrosion resistance, etc.
– Electronics: Precious metal powders in conductive pastes, connectors, and other components.
– Chemical and Catalyst Industries: As catalysts due to their high surface area, promoting chemical reactions.
Q6. Are Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making recyclable or reusable?
Yes, Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making can often be recycled or reused. Unused powder or scrap from manufacturing processes can frequently be collected, reprocessed, and reintroduced into production cycles, contributing to sustainable manufacturing practices.
Q7. How does the cost of Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making compare to traditional metal forms?
The cost depends on factors like the metal type, production method, and purity. While Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making may initially seem more expensive due to additional processing, their efficiency in certain manufacturing processes (like producing complex shapes with minimal waste) can lead to overall cost savings.
(Factory Supply Silicon Metal 553 Metallurgie Powder As High Pure Deoxidizer Agent In Steel Making)
