Overview of Single Layer Nano Molybdenum Disulfide Dispersion Monolayer MoS2 Liquid with Concentration 0.1mg/ml
Molybdenum (Mo) is a chemical element with the atomic number 42 and is represented by the symbol Mo on the periodic table. It is a transition metal located in group 6 and period 5. Molybdenum is known for its high melting point, excellent strength, and thermal stability, making it a crucial component in various industrial applications.
Feature of Single Layer Nano Molybdenum Disulfide Dispersion Monolayer MoS2 Liquid with Concentration 0.1mg/ml
-
High Melting Point: Molybdenum has one of the highest melting points among all pure elements, at 2,623°C (4,753°F). This property makes it ideal for high-temperature applications.
-
Strength and Toughness: Even at high temperatures, molybdenum maintains its strength and hardness, which is essential for use in extreme environments.
-
Corrosion Resistance: Molybdenum exhibits good corrosion resistance to many acids and alkalis, although it can be attacked by oxidizing acids like nitric acid.
-
Thermal Conductivity: It is an excellent conductor of heat, making it suitable for applications where efficient heat transfer is required.
-
Alloying Agent: Molybdenum is widely used as an alloying agent, particularly with steel, to enhance hardness, toughness, and resistance to wear and corrosion. Stainless steels often contain molybdenum for these properties.
-
Electrical Applications: Due to its low resistivity and high-temperature stability, molybdenum is used in electrical contacts and heating elements.
-
Lubricity: Molybdenum disulfide (MoS₂) is a common dry lubricant, providing low friction surfaces in high-pressure, high-temperature conditions.
(Single Layer Nano Molybdenum Disulfide Dispersion Monolayer MoS2 Liquid with Concentration 0.1mg/ml)
Parameters of Single Layer Nano Molybdenum Disulfide Dispersion Monolayer MoS2 Liquid with Concentration 0.1mg/ml
The concentration of the dispersion monolayer moles per liter (ml) is not specified in the question, but it can be determined by measuring the weight loss or the volume change of the dispersed layer during evaporation. This can be done using a loss coefficient such as the Zundel efficiency which relates the area of the interface between two materials to their respective mobilities.
For the single layer nano molybdenum disulfide dispersion monolayer MoS2 liquid with concentration 0.1mg/ml, the mass loss per unit time would depend on the thickness of the film and its rate of evaporation. The typical value for a molybdenum disulfide film is around 0.05-1mm/s, so if the film has a thickness of 1μm, the mass loss would be approximately 5-10mg/liter in one hour.
To determine the concentration of the MoS2 dispersed layer, you would need to measure the weight loss or the volume change of the film under this conditions. This can then be converted into a concentration based on known conversion factors. For example, if the weight loss per unit time is 0.5g/minute, and the concentration of the MoS2 is assumed to be 0.1mg/ml, the concentration would be approximately 0.1 x 0.5 = 0.05mg/ml. Please note that these values may vary depending on the specific conditions of the experiment.
(Single Layer Nano Molybdenum Disulfide Dispersion Monolayer MoS2 Liquid with Concentration 0.1mg/ml)
Company Profile
Metal in China is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality copper and relatives products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality metal powder and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQ
-
What are the primary uses of Single Layer Nano Molybdenum Disulfide Dispersion Monolayer MoS2 Liquid with Concentration 0.1mg/ml?
Single Layer Nano Molybdenum Disulfide Dispersion Monolayer MoS2 Liquid with Concentration 0.1mg/ml is primarily used in the production of steel alloys, accounting for over 80% of its consumption. It’s also used in chemicals, lubricants, electronics, and specialized applications like lighting and nuclear energy.
-
Is molybdenum found naturally?
Yes, molybdenum is found naturally in the Earth’s crust, often in minerals like molybdenite (MoS₂) and powellite (CaMoO₄). It is mined as a byproduct of copper mining.
-
How does Single Layer Nano Molybdenum Disulfide Dispersion Monolayer MoS2 Liquid with Concentration 0.1mg/ml affect human health?
In small amounts, molybdenum is an essential trace element for humans, playing a role in enzyme functions. However, excessive intake can lead to toxicity, though this is rare under normal dietary conditions.
-
Is molybdenum magnetic?
Molybdenum itself is not magnetic. It is classified as a diamagnetic material, meaning it repels magnetic fields slightly rather than being attracted to them.
-
What industries rely heavily on molybdenum?
The steel industry is the largest consumer of molybdenum, followed by the chemical, oil and gas, automotive, aerospace, and construction industries.
-
Is recycling molybdenum possible?
Yes, molybdenum can be recycled from scrap materials. Given its valuable properties and relative scarcity, recycling helps conserve resources and is economically viable.
(Single Layer Nano Molybdenum Disulfide Dispersion Monolayer MoS2 Liquid with Concentration 0.1mg/ml)
