Overview of silicon metal lump powder and granule 441 metal silicon 20-325mesh
silicon metal lump powder and granule 441 metal silicon 20-325mesh comprises a broad category of finely divided, solid particles derived from various metals or metal alloys. These powders exhibit unique characteristics that make them indispensable in modern manufacturing and advanced technologies.
Key Characteristics of silicon metal lump powder and granule 441 metal silicon 20-325mesh
-
Particle Size and Distribution: The size and uniformity of particles significantly influence flowability, packing density, and the final product’s mechanical and physical properties. Finer powders generally offer a larger surface area, which is beneficial for reactions and sintering but may also increase aggregation.
-
Composition: Metal powders can be elemental (pure metal) or alloyed, combining two or more metals to achieve desired properties such as enhanced strength, corrosion resistance, or electrical conductivity.
-
Shape: Particle shapes range from spherical to irregular or flake-like. Spherical powders provide better flowability and packing, while flake-shaped powders are suited for coatings and electronic applications due to their unique orientation and surface area.
-
Purity: Depending on the application, metal powders can be highly purified to remove impurities, critical for uses in electronics, aerospace, and medical devices where contamination could compromise performance.
(silicon metal lump powder and granule 441 metal silicon 20-325mesh)
Parameters of silicon metal lump powder and granule 441 metal silicon 20-325mesh
Metal Silicon (Silicon Metal) in the form of lumps, powder, and granules with a particle size ranging from 20-325 mesh (600 to 44 microns) typically has the following parameters:
1. Chemical Composition:
– Silicon (Si): The primary component is Silicon, which should be at least 99.9% pure for high-quality metal silicon.
– Impurities: May contain trace amounts of iron (Fe), aluminum (Al), carbon (C), and other metals, but these are usually below specified limits.
2. Particle Size Distribution:
– 20 Mesh (600 micron): This indicates that the largest particles in the mixture are approximately 600 microns in diameter.
– 325 Mesh (44 micron): The smallest particles in the sample are around 44 microns in diameter.
– A typical particle size range for this specification would be from 44 to 600 microns.
3. Purity and Density:
– Purity: As mentioned, it should be close to 99.9% Si, but check the specific product for exact purity.
– Density: Silicon metal has a density of approximately 2.33 g/cm³ or 2,330 kg/m³.
4. Hardness and Melting Point:
– Hardness: Silicon metal is relatively soft, with a Mohs hardness of about 4.
– Melting Point: Silicon melts at around 1,414°C (2,577°F).
5. Forms of Silicon Metal:
– Lumps: Solid blocks or irregular shapes.
– Powder: Finely ground particles.
– Granules: Coarser particles, generally spherical or irregular in shape.
6. Storage and Handling:
– Keep in a dry, cool place away from moisture and oxygen to prevent oxidation.
– Use appropriate handling equipment to avoid dust generation during handling.
7. Applications:
– Foundry materials for casting processes.
– Semiconductor industry as a key component in silicon wafers and solar panels.
– Metallurgical applications in steel and aluminum production.
Please note that these values are approximate and may vary depending on the specific manufacturer’s specifications. Always consult the product data sheet for the most accurate information.
(silicon metal lump powder and granule 441 metal silicon 20-325mesh)
Company Profile
Metal in China is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality copper and relatives products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality metal powder and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of silicon metal lump powder and granule 441 metal silicon 20-325mesh
Q1. What exactly is silicon metal lump powder and granule 441 metal silicon 20-325mesh, and how is it different from solid metal?
silicon metal lump powder and granule 441 metal silicon 20-325mesh consists of tiny particles of pure metals or metal alloys. Unlike solid metal, which exists as a continuous mass, metal powder offers increased surface area, making it more reactive and easier to form into complex shapes through processes like sintering or 3D printing.
Q2. How is silicon metal lump powder and granule 441 metal silicon 20-325mesh produced, and what are the common production methods?
silicon metal lump powder and granule 441 metal silicon 20-325mesh is typically produced through several methods, including:
– Atomization: Molten metal is sprayed into fine droplets that cool and solidify into powder.
– Chemical reduction: Metal oxides are reduced to their elemental state to form powder.
– Electrolysis: Electrical current is used to deposit metal onto a cathode, later harvested as powder.
– Mechanical processes: Large metal pieces are milled or ground down into powder.
Q3. What factors determine the quality and suitability of metal powders for different applications?
Quality and suitability depend on factors like:
– Particle size and distribution: Affects flowability, packing density, and final product properties.
– Composition and purity: Determines the material’s properties and its appropriateness for specific uses.
– Shape: Spherical powders for better flow, flake shapes for coatings.
– Density and porosity: Influences strength and other mechanical properties.
Q4. What safety precautions should be taken when handling metal powders?
Safety measures include:
– Wearing personal protective equipment (PPE) like gloves, goggles, and respirators.
– Storing powders in airtight containers away from moisture, heat, and ignition sources.
– Using explosion-proof equipment in processing areas.
– Ensuring proper ventilation to avoid dust accumulation and inhalation risks.
– Following strict handling procedures to prevent spills and cross-contamination.
Q5. How are silicon metal lump powder and granule 441 metal silicon 20-325mesh used in the manufacturing industry?
silicon metal lump powder and granule 441 metal silicon 20-325mesh find applications in:
– Powder Metallurgy: To create parts by compacting and sintering, ideal for mass production of complex components.
– Additive Manufacturing (3D Printing): Layer-by-layer construction of parts for customized and intricate designs.
– Thermal Spray Coatings: Applying protective or functional coatings to surfaces for corrosion resistance, etc.
– Electronics: Precious metal powders in conductive pastes, connectors, and other components.
– Chemical and Catalyst Industries: As catalysts due to their high surface area, promoting chemical reactions.
Q6. Are silicon metal lump powder and granule 441 metal silicon 20-325mesh recyclable or reusable?
Yes, silicon metal lump powder and granule 441 metal silicon 20-325mesh can often be recycled or reused. Unused powder or scrap from manufacturing processes can frequently be collected, reprocessed, and reintroduced into production cycles, contributing to sustainable manufacturing practices.
Q7. How does the cost of silicon metal lump powder and granule 441 metal silicon 20-325mesh compare to traditional metal forms?
The cost depends on factors like the metal type, production method, and purity. While silicon metal lump powder and granule 441 metal silicon 20-325mesh may initially seem more expensive due to additional processing, their efficiency in certain manufacturing processes (like producing complex shapes with minimal waste) can lead to overall cost savings.
(silicon metal lump powder and granule 441 metal silicon 20-325mesh)
