Overview of The low-d cas no 7440-5-3 powdered palladium black with 100% metal content

The low-d cas no 7440-5-3 powdered palladium black with 100% metal content comprises a broad category of finely divided, solid particles derived from various metals or metal alloys. These powders exhibit unique characteristics that make them indispensable in modern manufacturing and advanced technologies.

Key Characteristics of The low-d cas no 7440-5-3 powdered palladium black with 100% metal content

1. Particle Size and Distribution: The size and uniformity of particles significantly influence flowability, packing density, and the final product’s mechanical and physical properties. Finer powders generally offer a larger surface area, which is beneficial for reactions and sintering but may also increase aggregation.

2. Composition: Metal powders can be elemental (pure metal) or alloyed, combining two or more metals to achieve desired properties such as enhanced strength, corrosion resistance, or electrical conductivity.

3. Shape: Particle shapes range from spherical to irregular or flake-like. Spherical powders provide better flowability and packing, while flake-shaped powders are suited for coatings and electronic applications due to their unique orientation and surface area.

4. Purity: Depending on the application, metal powders can be highly purified to remove impurities, critical for uses in electronics, aerospace, and medical devices where contamination could compromise performance.

(The low-d cas no 7440-5-3 powdered palladium black with 100% metal content)

Parameters of The low-d cas no 7440-5-3 powdered palladium black with 100% metal content

The chemical formula for the compound you mentioned, Palladium(0) Black (Palladium in its pure elemental form), is Pd. Its CAS number is 7440-5-3. This refers to a specific form of palladium that appears as a black powder due to the high purity of the metal and possibly the presence of impurities in the form of small particles or nanoparticles.

Here’s a breakdown of the parameters you’ve provided:

1. CAS Number: 7440-5-3 – This is a unique identifier assigned by the Chemical Abstracts Service (CAS) to this particular chemical substance. It helps in identifying and referencing the compound universally.

2. Low-d or Low-density: The term “low-d” usually refers to a low density, but without more context, it’s unclear if this is referring to the density of the powdered palladium black or some other characteristic. In general, palladium has a density of around 12.02 g/cm³, which is relatively dense compared to some metals.

3. Powdered form: The material is in the form of a powder, which means it exists as fine particles rather than a solid block or crystal.

4. 100% metal content: This indicates that the product is essentially pure palladium, with no detectable impurities or other elements mixed in, aside from any naturally occurring trace elements.

5. Palladium(0) Black: This refers to the elemental palladium in its zero oxidation state, giving it a black appearance, which could be due to surface oxidation or impurities.

For more detailed information on the physical properties, chemical reactivity, or usage of this compound, please consult a reliable chemistry reference or supplier.

(The low-d cas no 7440-5-3 powdered palladium black with 100% metal content)

Company Profile

Metal in China is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality copper and relatives products.

The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are looking for high-quality metal powder and relative products, please feel free to contact us or click on the needed products to send an inquiry.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.

FAQs of The low-d cas no 7440-5-3 powdered palladium black with 100% metal content

Q1. What exactly is The low-d cas no 7440-5-3 powdered palladium black with 100% metal content, and how is it different from solid metal?

The low-d cas no 7440-5-3 powdered palladium black with 100% metal content consists of tiny particles of pure metals or metal alloys. Unlike solid metal, which exists as a continuous mass, metal powder offers increased surface area, making it more reactive and easier to form into complex shapes through processes like sintering or 3D printing.

Q2. How is The low-d cas no 7440-5-3 powdered palladium black with 100% metal content produced, and what are the common production methods?

The low-d cas no 7440-5-3 powdered palladium black with 100% metal content is typically produced through several methods, including:

– Atomization: Molten metal is sprayed into fine droplets that cool and solidify into powder.

– Chemical reduction: Metal oxides are reduced to their elemental state to form powder.

– Electrolysis: Electrical current is used to deposit metal onto a cathode, later harvested as powder.

– Mechanical processes: Large metal pieces are milled or ground down into powder.

Q3. What factors determine the quality and suitability of metal powders for different applications?

Quality and suitability depend on factors like:

– Particle size and distribution: Affects flowability, packing density, and final product properties.

– Composition and purity: Determines the material’s properties and its appropriateness for specific uses.

– Shape: Spherical powders for better flow, flake shapes for coatings.

– Density and porosity: Influences strength and other mechanical properties.

Q4. What safety precautions should be taken when handling metal powders?

Safety measures include:

– Wearing personal protective equipment (PPE) like gloves, goggles, and respirators.

– Storing powders in airtight containers away from moisture, heat, and ignition sources.

– Using explosion-proof equipment in processing areas.

– Ensuring proper ventilation to avoid dust accumulation and inhalation risks.

– Following strict handling procedures to prevent spills and cross-contamination.

Q5. How are The low-d cas no 7440-5-3 powdered palladium black with 100% metal content used in the manufacturing industry?

The low-d cas no 7440-5-3 powdered palladium black with 100% metal content find applications in:

– Powder Metallurgy: To create parts by compacting and sintering, ideal for mass production of complex components.

– Additive Manufacturing (3D Printing): Layer-by-layer construction of parts for customized and intricate designs.

– Thermal Spray Coatings: Applying protective or functional coatings to surfaces for corrosion resistance, etc.

– Electronics: Precious metal powders in conductive pastes, connectors, and other components.

– Chemical and Catalyst Industries: As catalysts due to their high surface area, promoting chemical reactions.

Q6. Are The low-d cas no 7440-5-3 powdered palladium black with 100% metal content recyclable or reusable?

Yes, The low-d cas no 7440-5-3 powdered palladium black with 100% metal content can often be recycled or reused. Unused powder or scrap from manufacturing processes can frequently be collected, reprocessed, and reintroduced into production cycles, contributing to sustainable manufacturing practices.

Q7. How does the cost of The low-d cas no 7440-5-3 powdered palladium black with 100% metal content compare to traditional metal forms?

The cost depends on factors like the metal type, production method, and purity. While The low-d cas no 7440-5-3 powdered palladium black with 100% metal content may initially seem more expensive due to additional processing, their efficiency in certain manufacturing processes (like producing complex shapes with minimal waste) can lead to overall cost savings.

(The low-d cas no 7440-5-3 powdered palladium black with 100% metal content)